Description

Closed-cell polyisocyanurate (polyiso) foam core integrally bonded to non-asphaltic, fiber-reinforced organic felt facers. Tapered ACFoam-II is offered in a variety of slopes, to achieve positive drainage as well as long-term thermal resistance (LTTR). Available in 4ft x 4ft (1220mm x 1220mm) panels with 1/8” (3mm), 1/4” (6mm) and 1/2” (12mm) per foot slope. Manufactured in accordance with ASTM C1289, Type II, Class 1, Grade 2 (20 psi) or Grade 3 (25 psi) and CAN/ULC-S704 Type 2, Class 3 or Type 3, Class 3.
PANEL LABEL AVERAGE THICKNESS SLOPE
2LTTR 3RSI in mm per ft. percent
AA 4.3 0.76 0.5–1.0 12–25 1/8″ 1%
A 7.1 1.25 1.0–1.5 25–38 1/8″ 1%
B 10.0 1.76 1.5–2.0 38–50 1/8″ 1%
C 12.9 2.27 2.0–2.5 50–63 1/8″ 1%
X 5.7 1.00 0.5–1.5 12–38 1/4″ 2%
Y 11.4 2.01 1.5–2.5 38–63 1/4″ 2%
Q 8.6 1.51 0.5–2.5 12–63 1/2″ 4%

2 LTTR (long term thermal resistance) values were determined in accordance with CAN/ULC-S770-09. Test samples were third-party selected and tested by an accredited material testing laboratory. The LTTR results were reviewed by FM Global and certified by the PIMA Quality Mark Program. 3 RSI is the metric expression of R-value (m2 • K/W).

Manufactured and tested for use in new and re-roofing applications. ACFoam-II is used in built-up (BUR), modified bitumen, metal, ballasted single-ply, mechanically attached single-ply and adhered single-ply roofing systems. These roofing systems depend on proper installation for successful performance. Refer to FM Approvals® RoofNav and UL Online Certifications Directory for additional application details.

PROPERTY TEST METHOD RESULTS
DIMENSIONAL STABILITY ASTM D2126 < 2%
COMPRESSIVE STRENGTH ASTM D1621 20 psi (140 kPa) or 25 psi (172 kPa)
WATER ABSORPTION ASTM C209 & D2842 < 1.5%, < 3.5%
WATER VAPOR TRANSMISSION ASTM E96 < 1.5 perm (85.5ng/(Pa•s•m2))
PRODUCT DENSITY ASTM D1622 Nominal 2.0 pcf (32.04 kg/m3)
FLAME SPREAD ASTM E84 (10 min.) 140–60
SMOKE DEVELOPMENT ASTM E84 (10 min.) 150–170
TENSILE STRENGTH ASTM D1623 > 730 psf (35 kPa)
SERVICE TEMPERATURE -100°F to +250°F

1Numerical ratings are not intended to reflect performance under actual fire conditions. Flame spread index of ≤75 and smoke development ≤450 meet code requirements for foam plastic roof insulation. Codes exempt foam plastic insulation when used in FM 4450 or UL 1256. Physical properties listed above are presented as typical average values as determined by accepted ASTM test methods and are subject to normal manufacturing variation.

  • ASTM C1289, Type II, Class 1, Grade 2 (20 psi) or Grade 3 (25 psi)
  • CAN/ULC-S704, Type 2, Class 3 or Type 3, Class 3
  • CCMC No. 12464-L
  • UL Certified for Canada – Insulated Roof Deck Assemblies Construction No. C38 and 52. Meet CAN/ULC-S126, CAN/ULC-S101 and CAN/ULC-S107
  • UL Standard 1256 Classification Construction No. 120, 123 & 292
  • UL Standard 790 (ASTM E108) Roofing Systems Classification
  • UL Standard 263 (ASTM E119) Fire Resistance Classification
  • UL Standard 1897 Uplift Resistance
  • FM Standard 4450/4470 Approved Refer to FM Approvals® RoofNav for Specific System Details
  • IBC Chapter 26 & NBC Sections on Foam Insulation
  • California State Insulation Quality Standards and Title 25 Foam Flammability Criteria (License #T 1231)
  • Miami-Dade County Approved
  • State of Florida Product Approval (FL17989)