Description

Heavy Duty Nailable Insulation Fastener with #4 Heavy Duty Drill Point. Specially engineered for attaching Atlas ACFoam® Nail Base and ACFoam® CrossVent® to thick steel substrates. Atlas Nail Base Fasteners are required for proper mechanical attachment of all ACFoam Nailable Insulation Systems.

MATERIAL: Case hardened and Tempered Carbon Steel
HEAD STYLE/DRIVE: Pancake Head with T-30 Internal Drive
HEAD DIAMETER: 0.625ʺ
SHANK DIAMETER: 0.190ʺ
THREAD LENGTH: 3.875ʺ
OVERALL LENGTH: 6ʺ thru 13.75ʺ
POINT: #4 (0.225ʺ dia.) Heavy Duty Drill Point
COATING: Epoxy E-Coat (black)
Passes more than 15 cycles (Kesternich) in accordance with DIN 500185
TENSILE STRENGTH SHEAR STRENGTH HEAD PULL-THRU VALUE1
(7/16ʺ OSB)
6,000 lbf 3,400 lbf 545 lbf
WITHDRAWAL VALUES IN STEEL1
Structural Steel 16 Ga. 13 Ga. 12 Ga. 3/16″ 1/4″
lbf 770 1130 1690 3100 4500

1“Head Pull-Thru” and “Withdrawal” data reflect average ultimate values.

Note: All tests were conducted by an independent testing laboratory. Test results are offered only as a guide and are not guaranteed in any way by Atlas Roofing Corporation.

IN MM PKG. QTY.
6.0 152 500/PAIL
8.0 203 500/PAIL
8.5 216 250/PAIL
9.75 248 250/PAIL
11.75 298 250/PAIL
13.75 349 250/BOX

NOTE: Two T-30 Driver Bits included in each package.